Interface 3,3/5 V IIC/I2C/TWI/SP​I 2004 caractère jaune/bleu module d'affichage LCD

Keywords you may need： Sensors Modules       Esp8266 Board       R3&ATMEGA2560       NodeMCU Sheild       Screw sheild       Nano Sheild Relay Temperature Controller Displays       OLED LED&RGB       LCR Amplifier Power supply      Step Up      Step down      Converter      Switch GPS Light Wireless/Wifi

Dear customer: Thank you for visit our store,we are proffessional "Business & Industrie" seller for 10 years,our main products included:Sensors,modules devolpment board, LED displays, other IC procuts an so on,any question about DIY robot,Arduino,or Raspberry Pi will be welcome to discuss with us,we will try our best to supply the most advanced product and price,(if we sale more,the cost of made one product will be reduce and we will change or price to make you save more. Hope you enjoying yourself here!

            We appreciate your business!  

• Shipping
• Payment
• Refund
• Feedback

Shipping

We will arrange shipping for you within 24 Hours after payment cleared except the holidays.

We only ship to the confirmed address provided by PayPal. Before you pay, please make sure your address in PayPal matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

-We ship items to Worldwide. Thank you!

-we will ship out the order in 1-2 business days after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries.

Payment

We accept PayPal payment ONLY.

Refund

* We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

* If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.

* Please include your eBay ID and item number with any email requests.

Feedback

* When you satisfied with our product and services please leave us positive feedback.

* If you have got the package, please confirm "Delivery on time " For us.

* If a problem occurs, contact us immediately with any email request.

* Just contact us using the " Ask the seller a question" link on eBay.

3.3/5V IIC/I2C/TWI/SP​​I Interface 20X4 Character Yellow/Blue LCD Display Module Description:

3.3V 2004LCD Display Color Options:
Blue                                                                                Yellow
                ERM2004FS-2 is 20 characters wide,4 rows character lcd module,SPLC780C controller (Industry-standard HD44780 compatible controller),6800 4/8-bit parallel interface,single led backlight with white color included can be dimmed easily with a resistor or PWM,fstn-lcd positive,black text on the white color,high contrast,wide operating temperature range,wide view angle,rohs compliant,built in character set supports English/Japanese text, see the SPLC780C datasheet for the full character set.

It's easily controlled by MCU such as 8051,PIC,AVR,ARDUINO,ARM and Raspberry Pi.It can be used in any embedded systems,industrial device,security,medical and hand-held equipment.

Specification

Gross Weight (kg)	0.0800
Manufacturer	EastRising
Series Number	ERM2004-2
Part Number(Order Number)	ERM2004FS-2
Connection	Pin Header
Display Format	20x4 Character
Sunlight Readable	Yes
Touch Panel Optional	No
Outline Dimension	98.00(W)x60.0(H)x14.0(T)mm
Visual Area	76.00x25.20mm
Active Area	70.40(W)x20.80(H)mm
Character Size	2.95x4.75mm
Diagonal Size	No
Dot (Pixel) Size	0.55x0.55mm
Dot Pitch	0.60x0.60mm
IC Package	COB
IC or Equivalent	AIP31066 , HD44780, KS0066 , SPLC780 , ST7066
Interface	6800 4-bit Parallel , 6800 8-bit Parallel
Display Type	FSTN-LCD Grey
Response Time(Typ)	No
Contrast Ratio(Typ)	No
Colors	No
Viewing Direction	6:00
Viewing Angle Range	No
Appearance	Blue
Brightness(Typ)	No
Backlight Color	Blue Color
Backlight Current (Typ)	75mA
Power Supply(Typ)	3.3V
Supply Current for LCM(Max)	2000uA
Operating Temperature	-20℃~70℃
Storage Temperature	-30℃~80℃

P ackage included:1 * 3.3V IIC/I2C/TWI/SPI Serial Interface 20X4 Character LCD Module(Blue/Yellow Backlights)
5V 2004LCD Display Blue                                                                                           Yellow                1. The module is a low-power consumption character LCD Module with a built-in controller.
2. The module can be easily interfaced with a MCU.
3. Display Format: 20 Characters x 4 lines.
4. It is fantastic for Arduino based project.
5. Supply voltage: 5V.
6. Fully assembled and tested Serial LCD 20x4 Module.
7. White Text, Blue backlight.
8. Analog Interface.
9. Size: 98 x 60 x 12mm.
Package included：1 x  2004 204 20x4 Character LCD Display Module 2004 LCD Blue/Yellow Blacklight
I2C 2004LCD Dispaly Blue                                                                                                        Yellow                             This is IIC Serial 20X4 LCD module . With this I2C interface LCD module, you will be able to realize data display via only 2 wires.
If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.
Specification:
Interface: I2C
I2C Address: 0x27(addres can't be changed )
Sofware version :0022
SDA (DATA) -> analog input pin 4
SCL (CLOCK) -> analog input pin 5
Pin Definition : GND、VCC、SDA、SCL
Back lit (yellow with white char color)
Supply voltage: 5V
Pcb Size : 60mm×99mm
Contrast Adjust : Potentiometer
Backlight Adjust : Jumper
Package included：1 x   Blue/Yellow Display IIC/I2C/TWI/SPI Serial Interface 2004 Character LCD Module
2004 LCD Display+1.4 Reprap Adapter After connecting this panel to your Ramps you don't need your pc any more, the smart controller supplies power for your SD card. Furthermore all actions like calibration, axes movements can be done by just using the rotary encoder on the smart controller
Print your 3D designs without PC, just with a g-code design stored on the SD card.
Firmware: You need Marlin firmware v3 or newer. If you are using older firmware, you must re-flash your board.
Size: 15cm x 5.8cm.
Compatible With RAMPS 1.4 Reprap Mendel
Package Included:
1 x 20*4 2004 LCD Display 3D Printer Controller + Adapter RAMPS 1.4 Reprap Mendel2004 LCD Display+1.4 Reprap Adapter

---

Am 04.05.17 hat der Verkäufer die folgenden Angaben hinzugefügt:

• Condition: Neuf
• Model: 3.3V 2004LCD Blue Display
• Brand: Unbranded/Generic
• Country/Region of Manufacture: China
• Marke: Markenlos

Voir Plus