71500 Exhaust Manifold Bolt Stud Drill Template Removal Tool for Dodge 5.7L Hemi

EUR 157,19 Achat immédiat, Livraison gratuite, 60-Jour Retours, Garantie client eBay
Vendeur: usa-auto-plus ✉️ (120) 99.1%, Lieu où se trouve: Shenzhen, CN, Lieu de livraison: EUROPE, ASIA, Numéro de l'objet: 126185493488 71500 Exhaust Manifold Bolt Stud Drill Template Removal Tool for Dodge 5.7L Hemi.
  •  
    • 【GREAT COMPATIBILITY】-- Custom fitted, the 71500 exhaust manifold drill template tool kit perfectly fits for Dodge 5.7L Hemi motors.
     
    • 【EXCELLENT FUNTION】-- This exhaust manifold template tool kit designed to remove broken exhaust manifold bolts on for Dodge 5.7L Hemi motors without damaging the cylinder head.
     
    • 【UNQUE DESIGN】-- This exhaust manifold template tool kit designed with double-sided drill depth gauge to ensure the water jacket is not pierced.
     

    Usa-auto-plus

    Your best choice

    71500 Exhaust Manifold Bolt Stud Drill Template Removal Tool for Dodge 5.7L Hemi

     

    • 【GREAT COMPATIBILITY】-- Custom fitted, the 71500 exhaust manifold drill template tool kit perfectly fits for Dodge 5.7L Hemi motors.

     

    • 【EXCELLENT FUNTION】-- This exhaust manifold template tool kit designed to remove broken exhaust manifold bolts on for Dodge 5.7L Hemi motors without damaging the cylinder head.

     

    • 【UNQUE DESIGN】-- This exhaust manifold template tool kit designed with double-sided drill depth gauge to ensure the water jacket is not pierced.

     

    • 【EASY TO USE】-- This exhaust manifold template tool kit is convenient and easy to use. Use tapered bolts mount the base plate in place over the bolt holes and slip-fit bushings, which allowing you to move from hole to hole without moving the base plate. The screw extractor is then used to remove the damaged bolt. Comes with bushing for drilling to tap size when Extractor is not available.

     

    • 【PACKAGE INCLUDE】-- The 71500 exhaust manifold drill template tool kit includes blow molded case, stud extractor, drill plate, drill depth gauge, alignment bolt, 8mm tap aligner, lock screw, (1/8'', 3/16'', 17/64'') slip/fix bushing, 1/8'' cobalt drill, 3/16'' cobalt drill, 17/64'' cobalt drill. 100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product.

     

     

     

     

    How to Remove The Broken Exhaust Manifold Bolts

     

    1. Have to ensure the surface is clean before mounting correctly the Base Plate. Broken bolts need to be flush.

     

    2. Screw the Lock Screw to the Base Plate where you will be drilling the hole.

     

    3. Install the Base Plate according to the plate markings and use the Alignment Bolts tightening evenly to make sure the plate centers up.

     

    4. Insert the 1/8" Drill Bushing, twisting clockwise it to lock into the locking screw.

     

    5. Install the 1/8" Drill Bit in a drill. Use the Drill Depth Gauge to ensure the drill bit isn’t too long to puncturing a water jacket. Run the drill at 500 to 700 RPM. Note: That will allow drilling 1-1/2'' for GM side of gauge, and the1-5/8'' for Dodge.

     

    6. In order to keep the Drill Bit cool, apply transmission fluid or cutting oil on the bit or in the hole before and in between drilling. But Do not use penetrating oil.

     

    7. Pull out after drilling for 5 to 10 seconds. Reapply lubricant to keep bit cool. Repeat until you get all the way through the bolt.

     

    8. Clear the hole of shavings with an air gun.

     

    9. Switch to 3/16" Drill Bit & Bushing and drill approximately 1" deep. This will ensure good contact with extractor.

     

    10. Remove the Drill Bushing, then tap the Extractor with a hammer and remove the broken bolt.

     

    11. If ues the extractor is still unable to remove the broken bolt, put the 3/16" Drill Bushing back in and drill all the way through the bolt with the 3/16" Drill Bit. Then repeat the same process using the 17/64" Drill Bit and Bushing.

     

    12. Insert the Tap Guide and use a M8x1.25 Tap to remove the remaining steel from the threads. Screw the tap in and out again until job is complete.

    Item Specifics
    Type Exhaust Manifold Bolt Stud Drill Template Removal Tool
    EAN Non applicable
    Marque UAP-Auto
    Numéro de pièce fabricant 71500
    Garantie fabricant 1 an
    Payment

    1. Payment methods accepted: Paypal only . Our Paypal account allows you to pay by credit card, debit card and your Paypal balance.


    2. All major credit cards are accepted through our secure payment processor Paypal.


    3. Payment must be received immediately.


    4. We ship items to Your Paypal address .Please make sure your Paypal address is correct before you pay,cause it cannot be changed once the order shipped out.

    Shipping

    1. Item will be shipped within 1 business day after your payment cleared.


    2. Item will be shipped by SpeedPak or other shipping method .


    3. Delivery time depends on destination and other factors,please feel free to contact us by email if you cannot get your order in time.
     

    Please read the shipment and payment detail carefully before you place the order .

    Returns

    1. Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).

    2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.

    3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

    Contact Us

    Please contact us via ebay using"Contact member". We will respond within 1 business day or less.Thank you for your understanding.

    Our office hours is as below :

     

    - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
    - 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
    And our office is closed on Sunday and public holidays (Hong Kong)
    We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member". We will respond within 1 business day or less. Please include your ebay item numberor order number in all communications.

    Usa-auto-plus

    Your best choice

    DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US
    Shop Category  Store Home  Other Hot Item
    Replacement for Nature2 W28002 Mineral Cartridge for Zodiac All DuoClear System
    EUR 99.99
    AM141075 Electronic Control Unit Module for John Deere Lawn Garden Tractor - NEW
    EUR 60.99
    115225FS Tilt Trim Seal Kit for Yamaha Boat Power Units 115HP 150HP 175HP 200HP
    EUR 22.99
    22314183 Potentiometer Trim & Tilt Sender Sensor Kit for Volvo Penta SternDrives
    EUR 27.99
    Upgraded 000-14041-001 Power Cable For Lowrance HDS, Elite FS/Ti2, Hook, Mark
    EUR 15.69
    Hot Sale!

    New List Item
    YSH34913 Rear A/C Line Hose Set for GMC Yukon/Cadillac Escalade/Chevrolet Tahoe
    EUR 339.99
    SPX0710X32 Multiport Vari-Flo Side Mount Filter Valve for Hayward S200 S240 SER
    EUR 187.99
    JIC37° Hydraulic Swivel Run Tee Hydraulic Tee Connector Tester Tee Coupling Set
    EUR 147.99
    GK-01 Hydraulic Accumulator Nitrogen Charging System Nitrogen Pressure Test Set
    EUR 306.99
    261055 Multiport Valve for Pentair Triton and Quad Pool/Spa D.E. & Sand Filter
    EUR 241.00
    Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us
    71500 Exhaust Manifold Bolt Stud Drill Template Removal Tool for Dodge 5.7L Hemi

     

    • 【GREAT COMPATIBILITY】-- Custom fitted, the 71500 exhaust manifold drill template tool kit perfectly fits for Dodge 5.7L Hemi motors.

     

    • 【EXCELLENT FUNTION】-- This exhaust manifold template tool kit designed to remove broken exhaust manifold bolts on for Dodge 5.7L Hemi motors without damaging the cylinder head.

     

    • 【UNQUE DESIGN】-- This exhaust manifold template tool kit designed with double-sided drill depth gauge to ensure the water jacket is not pierced.

     

    • 【EASY TO USE】-- This exhaust manifold template tool kit is convenient and easy to use. Use tapered bolts mount the base plate in place over the bolt holes and slip-fit bushings, which allowing you to move from hole to hole without moving the base plate. The screw extractor is then used to remove the damaged bolt. Comes with bushing for drilling to tap size when Extractor is not available.

     

    • 【PACKAGE INCLUDE】-- The 71500 exhaust manifold drill template tool kit includes blow molded case, stud extractor, drill plate, drill depth gauge, alignment bolt, 8mm tap aligner, lock screw, (1/8'', 3/16'', 17/64'') slip/fix bushing, 1/8'' cobalt drill, 3/16'' cobalt drill, 17/64'' cobalt drill. 100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product.

     

     

     

     

    How to Remove The Broken Exhaust Manifold Bolts

     

    1. Have to ensure the surface is clean before mounting correctly the Base Plate. Broken bolts need to be flush.

     

    2. Screw the Lock Screw to the Base Plate where you will be drilling the hole.

     

    3. Install the Base Plate according to the plate markings and use the Alignment Bolts tightening evenly to make sure the plate centers up.

     

    4. Insert the 1/8" Drill Bushing, twisting clockwise it to lock into the locking screw.

     

    5. Install the 1/8" Drill Bit in a drill. Use the Drill Depth Gauge to ensure the drill bit isn’t too long to puncturing a water jacket. Run the drill at 500 to 700 RPM. Note: That will allow drilling 1-1/2'' for GM side of gauge, and the1-5/8'' for Dodge.

     

    6. In order to keep the Drill Bit cool, apply transmission fluid or cutting oil on the bit or in the hole before and in between drilling. But Do not use penetrating oil.

     

    7. Pull out after drilling for 5 to 10 seconds. Reapply lubricant to keep bit cool. Repeat until you get all the way through the bolt.

     

    8. Clear the hole of shavings with an air gun.

     

    9. Switch to 3/16" Drill Bit & Bushing and drill approximately 1" deep. This will ensure good contact with extractor.

     

    10. Remove the Drill Bushing, then tap the Extractor with a hammer and remove the broken bolt.

     

    11. If ues the extractor is still unable to remove the broken bolt, put the 3/16" Drill Bushing back in and drill all the way through the bolt with the 3/16" Drill Bit. Then repeat the same process using the 17/64" Drill Bit and Bushing.

     

    12. Insert the Tap Guide and use a M8x1.25 Tap to remove the remaining steel from the threads. Screw the tap in and out again until job is complete.

    Payment

    1. Payment methods accepted: Paypal only . Our Paypal account allows you to pay by credit card, debit card and your Paypal balance.


    2. All major credit cards are accepted through our secure payment processor Paypal.


    3. Payment must be received immediately.


    4. We ship items to Your Paypal address .Please make sure your Paypal address is correct before you pay,cause it cannot be changed once the order shipped out.

    Shipping

    1. Item will be shipped within 1 business day after your payment cleared.


    2. Item will be shipped by SpeedPak or other shipping method .


    3. Delivery time depends on destination and other factors,please feel free to contact us by email if you cannot get your order in time.
     

    Please read the shipment and payment detail carefully before you place the order .

    Returns

    1. Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).

    2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.

    3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

    Contact Us

    Please contact us via ebay using"Contact member". We will respond within 1 business day or less.Thank you for your understanding.

    Our office hours is as below :

     

    - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
    - 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
    And our office is closed on Sunday and public holidays (Hong Kong)
    We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member". We will respond within 1 business day or less. Please include your ebay item numberor order number in all communications.

    All rights reserved.

    • Condition: Neuf
    • Type: Exhaust Manifold Bolt Stud Drill Template Removal Tool
    • Marque: UAP-Auto
    • Numéro de pièce fabricant: 71500
    • Garantie fabricant: 1 an
  • PicClick Insights - 71500 Exhaust Manifold Bolt Stud Drill Template Removal Tool for Dodge 5.7L Hemi PicClick Exclusif

    •  Popularité - 1 personne suit la vente, 0.0 de nouvelles personnes suivent la vente par jour, 136 days for sale on eBay. Nombre normal suivi. 0 vendu, 10 disponibles.
    •  Meilleur Prix -
    •  Vendeur - 120+ articles vendu. 0.9% évaluations négative. Grand vendeur avec la très bonne rétroaction positive et plus de 50 cotes.

    Les Gens ont Aussi Aimé PicClick Exclusif