STUDIO HOME STUDIO INSTRUMENT INFORMATIQUE MUSICALE LOGICIEL MAO ESPACE DJ ESPACE GUITARE ESPACE FLIGHT-CASE TRAITEMENT ACOUSTIQUE SONORISATION CÂBLES AUDIO ACCESSOIRES

KORG - ELECTRIBE 2 SAMPLER ROUGE

Référence : ELECTRIBE 2 SAMPLER RED

Disponibilité:   Article en stock Livraison:   Sous 24/48 heures Garantie: 3 ans pièces & main-d'oeuvre

En Savoir Plus :

KORG - ELECTRIBE 2 SAMPLER ROUGE - SAMPLER ET GROOVEBOX

Electribe2 ! Oui vous avez bien lu ! 10 ans après la sortie de l'Electribe EMX, voici l'electribe de nouvelle génération. Elle intègre un pavétactile, un séquenceur pas àpas de nouvelle génération, de nouveaux effets et surtout un nouveau moteur sonore de modélisation analogiques et PCM. Ce n'est pas tout, les célèbres filtres du kingKORG sont présents ! La nouvelle electribe se synchronise àl'univers analogique KORG et pourra donc tourner de paire avec les volca, electribe, MS-20 ou kingKORG et pour parfaire le tout, l'electribe travaille en totale interactivitéavec Ableton Live : vous allez pouvoir sauvegarder vos compositions et mix dans l'electribe pour les recharger directement dans Live sous forme de scènes et clips vous permettant toutes les manipulations dont vous êtes si friand.

L'electribe2S-RED intègre les dernières technologies KORG

L'electribe2S-RED renait en intégrant les dernières technologies distillées au sein des produits à succès comme les KingKORG, kaossilator, kaoss pad, et taktile. La mémoire interne vous offre la possibilité de sauvegarder jusqu'à 250 patterns, incluant les preset de pattern correspondant parfaitement aux besoins de la scène electro d'aujourd'hui. Une autre évolution majeure que les nouvelles electribes2S intègrent est la lecture polyphonique, ce qui est indispensable pour les styles actuels utilisant des progressions d'accords complexes comme la House.

Un séquenceur pas à pas évolué

En utilisant les 16 pads de la façade, vous pouvez créer des patterns intuitivement tout en écoutant et voyant ce que vous êtes entrain de créer. Vous pouvez utiliser les pads comme clavier pour enregistrer des phrases en temps réel, ou travailler en enregistrement pas à pas en entrant les valeurs de note et de temps pour chaque pas. Les motifs que vous créez peuvent être utiliser alternativement dans deux modes, bénéficiant ainsi des avantages du step Jump que vous retrouvez également sur la série volca, ou en mode Last step pour varier la durée de chaque partie. Vous disposez également de la fonction motion sequence, permettant d'enregistrer les automations des potentiomètres et boutons au sein de vos patterns.

Les batteries ou synthétiseurs peuvent maintenant être assigné à chacune des 16 parts. Par exemple vous pouvez créer des rythmes complexes en assignant les batteries sur les 16 parties.

Créateur de beat intuitif utilisant les Trigger pads et le pavé tactile

Devenu célèbre depuis le kaossilator c'est la fonction "touch scale" qui permet à tout le monde de jouer sans aucune fausse note (dans la tonalité de votre choix) juste en déplaçant le doigt sur le pavé tactile. Les trigger pads devenus populaires avec les taktile sont également présents, permettant à tous de créer des phrases de manière intuitive. Les trigger pads peuvent également être utilisés pour entrer les parties batteries. Les réglages vous permettent d'activer ou non la vélocité.

Un moteur de synthèse hybride offrant sampling et modélisation

KORG a spécialement créé un moteur de synthèse pour l'electribe2S, conçu pour booster votre créativité.

Le moteur de sampling vous permet de jouer des sons uniques et originaux pendant que le moteur de modélisation analogique sera idéal pour générer des sons de basses ou de nappes. vous disposez d'un total de 999 presets, sample utilisateurs et d'un maximum de 270 secondes de temps de sampling (calculé en mono) utilisables. L'electribe est livrée avec un large choix de batteries, rythmes/ loops et sample hit. (collaboration avec Sample Magic, Loopmasters, Prime Loops)

Le paramètre de modulation vous permet la création de son sophistiqué, avec l’Electribe ce paramètre à été simplifié en regroupant jusqu'à trois paramètres simultanément : il suffit de sélectionner un modèle qui spécifie un effet et sa cible et ensuite ajuster la vitesse et la profondeur de l'effet pour tous les goûts

Fonctions de sampling évoluées utilisant le Time Slice et le Resampling

La fonction "Time Slice" détecte les attaques dans une phrase et la découpe intelligemment permettant de jouer cette phrase au tempo de votre choix sans en affecter le pitch et la qualité. Les sons au sein de cette découpe peuvent être utilisé séparément en les assignants au pas ou parts. Vous pouvez même appliquer un effect à un échantillon et le resampler en utilisant les potentiomètres pour varier le pitch ou les modulations.

Potentiel de créativité encore plus élevé : Effets et modèles de Groove

La nouvelle electribe offre des effets comme la compression et l'overdrive pour chaque partie, vous offrant un contrôle sans compromis dans les nuances de chaque sons apportant la subtilité nécessaire à chaque style de musique. La fonction groove peut-être spécifiée pour chaque partie, vous permettant d'appliquer un groove à votre phrase simplement en sélectionnant un pré-réglage.

Nouvelles fonctions pour les performances live : Effets Master, Réglages de pattern, Sync in/out

Les effets master peuvent être contrôlé par le pavé tactile comme un kaoss pad. Ils n'incluent pas seulement un effet spatial modifiant la forme acoustique générale mais ils peuvent également appliquer massivement des transformations musicales comme l'arrêt d'un vinyle, effet hérité de la série Kaoss pad. Nouvellement développé, les "Seq Reverse" et "Odd Stepper" changent le sens ou l'ordre de la lecture du séquenceur. Ces nouveaux effets sont également extrêmement efficace en performance live. Les effets insérés peuvent être assignés à chaque partie individuellement.

Vous bénéficiez également de la fonction "pattern set" vous permettant de changer de patterns en pressant trigger pads, et une fonction "event recording" permettant d'enregistrer cette performance. En addition à tout ceci les MIDI IN/OUT, "Sync IN/OUT" sont également de la partie permettant de synchroniser les performances avec les volca, monotribe ou MS-20 mini. L'electribe peut fonctionner avec 6 piles AA, vous pouvez donc facilement emmener votre electribe partout avec vous et produire ou composer avec.

Interactivité totale avec Ableton Live

Transformez votre inspiration en production créative. KORG a collaboré avec Ableton pour offrir une nouvelle manière de produire en combinant le meilleur du hardware et du software. L'electribe sampler peut enregistrer pour Ableton Live, le célèbre DAW, chaque partie de phrases sera convertie en interne en fichiers audio. Ces fichiers peuvent être facilement chargés dans les pistes appropriées de Live pour un travail ultérieur.

Caractéristiques :

Sound System

• Polyphonie maximale :  24 voix* (Pseudo-polyphonique**)

*La polyphonie d'un motif complet varie en fonction de l'oscillateur, du filtre et du type d'insert d'effet.

** Les paramètres indépendants pour chaque voix ont été simplifiés; quatre voix partagent les paramètres d'une voix conventionnelle.

• Nombre de parts :  16
• Fréquence d'échantillonnage :  48.0 kHz
• Number of Sound Samples :  jusqu'à 999 (incluant les User)
• Nombre de types de filtre :  3
• Nombre de types de modulation :  72
• Capacité mémoire :  250 patterns
• Effets : 

Effets d'insert (38 types)

Effets master (32 types)

Séquenceur

• Jusqu'à 64 pas pour chaque partie.
• Jusqu'à 24 modulation de séquences pour chaque pattern.
• Le dernier pas peut varier sur chaque part.

Trigger Pads

• 16 (Sensitifs à la vélocité)

Connexions

Audio :

• Sortie L/Mono (Jack)
• Sortie R (jack)
• Casque (mini jack stéréo)
• Entrée ligne (mini jack stéréo)

MIDI : In, Out (nécessite le cable adaptateur MIDI inclus)

USB : Type micro B

Sync : In, Out (mini jack stéréo)

Stockage de données :  SD Card (supérieur à 1GB), SDHC Card (jusqu'à 32GB)

Alimentation secteur ou 6 piles AA ( Alkaline ou Nickel metal)

Longévité des piles : Environ 5 heures

Consommation actuelle est inférieure à 500 mA

Châssis : Zinc moulé

Dimensions : 339 mm x 189 mm x 45 mm

Poids : 1.6 kg

Plage de température pour fonctionnement : 0- +40℃ (sans condensation)

Accessoires : Adaptateur secteur (KA-350), 2 câbles adaptateur MIDI , Ableton Live 9 Lite (carte de licence inclue)

KORG - ELECTRIBE 2 SAMPLER RED

Reference : ELECTRIBE 2 SAMPLER RED

399,00 €

Availability:   Available in stock Processing time:   Under 24/48 hours Guaranty: 3 years by manufacturer

More info

KORG - ELECTRIBE 2 SAMPLER RED - 16-part Drum Machine with 409 Analog Modeling/PCM Sounds

The fastest and most intuitive way to make beats. A production machine that lets you create using a gigantic array of samples.

The electribe sampler is a sample-based production machine that lets you construct beats at maximum speed. You can freely edit and resample using waveforms that you've loaded and preset samples. Modulation and effects can be controlled easily just by turning knobs on the top panel. In addition, a variety of input interfaces optimized for inputting rhythm, bass, or melody allow you to smoothly create sequences as fast as you can think.

The sequences that you create can then undergo additional evolution on stage or in your laptop. You can enjoy intuitive live performances that link various devices with the electribe sampler, or utilize this capability for full-fledged music production by exporting sequence data to Ableton Live for detailed editing and final mixing.

The latest system version 2 adds a much-requested pattern chain function that will be a great asset for live performances or music production. The lineup has also become more colorful with the new metallic red model. And we've also provided bonus patterns that reveal even greater sonic potential.

Making your beat-making ideas rapidly take shape. It's the electribe sampler; a sampler + sequencer that's thoroughly optimized for speed.

A new metallic red model – a nod to the legacy of electribe

Following the dark black unit, the lineup has been joined by a metallic red model that's reminiscent of the previous model, the ELECTRIBE SX. Complemented by the numerous colorfully illuminated LEDs, this unit will energize your playing.

Many new functions added via system update

Updates make the electribe sampler evolve daily. System version 2 adds support for the much-requested pattern chain function and undo function, as well as support for original value display. Users who already own an electribe sampler can update their unit and then enjoy playing.

Download over 200 bonus patterns

Electribe artists, sound designers, and beat makers from around the world have created bonus pattern data packed with new sounds, phrases, and sequences. These 237 different patterns are packed with sample sounds, drum kits, and ideas for a wide range of musical styles. They are provided as reference materials for your beat-making or as foundations to give you new inspiration.

Import any waveform, and even resample

The electribe sampler lets you load any sample from an SD card and use it for producing beats. There are 499 user sample memories in which you can store original waveforms that you've created using waveform editing software or sampled sources provided by developers. Of course you can also connect a record player or instrument to the audio in jack and sample from it.

You can edit the loaded waveforms in basic ways such as changing the start/end point or pitch, and even time-slice them. The attack portions of a phrase can be detected and sliced automatically, allowing you to play them back at a desired tempo without significantly changing the sound. Sliced parts can also be assigned to specific steps or parts and triggered individually.

There's also a resampling function that lets you sample a sound that you processed, a phrase that you constructed, or your realtime performance on the electribe sampler. Additional possibilities open up when you use this in conjunction with time slices; you can change the order or rhythmic groove of a phrase, or turn a multiple-part phrase into a single sample, allowing you to add phrases using the newly-free parts to create an even more complex pattern.

High-quality preset samples that let your ideas take shape quickly

The electribe sampler contains numerous production-ready sampled sources that you can use as soon as you power-on the unit. It provides a range of sampled audio sources suitable for any style of music, including 179 Drum/Perc samples such as Kick and Snare sounds that are indispensable for creating beats, 33 loop-type samples as you would expect from a sampler, 31 voice-type samples, 37 sound effect samples, and 123 more instrumental samples containing hits, shots, or phrases of Piano, Organ, Brass, or Guitar. Based on these samples from collaborators famed for their high quality, such as Sample Magic, Loopmasters, Prime Loops, and Raw Cutz, you can create the exact sample sounds that you want.

In addition, the electribe sampler provides 16 analog modeling oscillators and three filters, which you can use as accents for your sample-based music productions.

Modulation section for quick access to dramatic sound-shaping parameters

The modulation that's so important for sonic creativity is designed to be easy for anyone to control. Modulation sources such as EG and LFO are available paired with a modulation target such as Filter Cutoff and Oscillator Pitch; simply choose from 72 modulation types and then adjust the speed and depth to apply the type of modulation that you want.

A wide selection of insert effects add the final touch to parts and patterns

A total of 32 insert effects are provided, including compressor, overdrive, and EQ. Effects can be specified individually for all parts, letting you have uncompromising control over the nuances of your sound.

Velocity-sensitive trigger pads and X/Y touch pad work together; input notes or X/Y-generated phrases to bring your ideas to life.

The electribe sampler allows you to input up to 64 steps (16 steps x 4) for each part (sound). You can create beats by combining up to 16 of these parts per sequence pattern.

The step sequencer of the electribe sampler allows extremely intuitive pattern production. The 16 trigger pads and the touch pad with XY control provide a variety of modes that instantly reproduce the phrases created by your ideas, allowing rhythms and phrases to be input without requiring musical knowledge.

Trigger pads

• Trigger mode 

This mode is ideal for auditioning the sounds before you enter a sequence. The trigger pads are velocity sensitive, and by striking them rhythmically you can input drum and percussion patterns that have a sense of life and movement.

• Sequencer mode 

This mode is ideal for inputting rhythm. You can step-record by using the 16 trigger pads which correspond to 16 steps. This method makes it easy to see the timing of the notes, and can also be used for editing after realtime recording.

• Keyboard mode

This mode is ideal for playing melodies. The 16 trigger pads act as a keyboard, allowing you to play melodies according to the scale/key settings. You can also change the octave.

• Chord mode

This mode is ideal for playing chords. Simply by pressing a trigger pad, you can easily play chords according to the scale/key settings.

Touch pad

• Gate Arp mode

This mode is ideal for inputting bass riffs or hi-hat parts with a sense of groove. While playing the trigger pads or the touch pad, you can use the gate arpeggiator to generate rhythmically detailed notes.

• Touch Scale mode

This mode is ideal for those who are not comfortable with playing melodies on the keyboard, or as a way to generate some inspiration. Simply by moving your fingertip over the touch pad as on the Kaossilator, you can freely produce phrases according to the specified scale/key settings.

The electribe sampler seamlessly lets you edit sounds and input sequences in parallel. Input a sequence and edit the sound while listening to it. Efficient beat-making that would be difficult using just a DAW becomes stress-free on the electribe sampler, which allows you to think at the same speed as the music you're hearing.

Motion Sequence records parameter movements

The motion sequence function records and reproduces knob movements. You can add time-varying movement to looped sounds, creating a completely original flow of sound.

Last Step selector generates unconventional time signatures

The last step function lets you change the number of steps in the selected part. You can create unexpected and unconventional rhythms by specifying a different number of steps for each part. This function is also useful when you want to instantly change the character of the song, or when you want to adjust the length of the song.

Groove adds a natural rhythmic feel

You can choose from a total of 25 groove types that reproduce the playing technique and rhythmic feel of percussion instruments such as congas and bongos. By selecting a groove type for each part and adjusting its dynamics, you can create a natural-sounding rhythmic feel that's liberated from the 16-step grid.

Control your sequences in real time with absolute freedom

Sequences that you've created on the electribe sampler will shine even more on stage when you use the various functions provided for this purpose.

For example by using, the step jump function that lets you jump instantly to the step you press, you can create dynamic performances as though you were performing the sequence itself.

The electribe sampler also lets you freely use the trigger pads and touch pad to add sounds during your live performance. Thanks to the scale/key settings, you'll never play a wrong note.

The sequences that you create can be played not only on stage, but are also fun to tweak in real time. The dynamic character of such changes makes this one of the electribe sampler's great pleasures.

Use Pattern Set and Pattern Chain to build and organize full arrangements 

The pattern set function lets you register your favorite sequence patterns to the trigger pads and instantly switch between them. While you play, you can switch successively between patterns to vary the beat.

In system version 2, a pattern change function has been newly added. Using this, multiple sequence patterns can be connected for successive playback, allowing you to construct large-scale development in your song.

X/Y pad offers real-time effects performance

You can use the touch pad to freely control the master effect just as on the Kaoss Pad. You can use spatial-type effects to add overall resonance, or use "Looper" to easily create the texture of your sequence, or even use effects such as "Seq Reverse" or "Odd Stepper" to aggressively transform the music. This is also enormously effective in a live performance. 

Sync, MIDI, and Audio In jacks for integration into any setup

Since there's a sync jack for easy connection to KORG's groove machines, you can connect the electribe sampler to your electribe, volca series unit, or SQ-1 for playback sessions that are synchronized with your sequencer. 

MIDI connectors are also provided for inter-operation with your DAW. By adding the electribe sampler's performance to your laptop-based stage setup, you can take advantage of even greater performance possibilities. 

In addition to sampling via the audio in jack, you can use it during your performances, for example by applying filter and effects to an external audio input source in real time, or using the step sequencer to turn the output on/off. 

In the past, machine-centric live setups required numerous synthesizers, samplers, and sequencers. Today, the electribe sampler can function in a variety of roles, either as the master device at the center of such a setup, or as a slave device that adds sparkle to the performance. Experiment with connecting different instruments to create your very own live setup.

Inter-operation with Ableton Live for a new production workflow

Using your software, you can take the numerous beats that you've come up with and assemble them into a finished product. KORG has partnered with the German company Ableton to provide a new music production workflow that uses both hardware and software.

In addition to the conventional audio export, the electribe sampler has a function for exporting to "Ableton Live" DAW software. When the dedicated project file that's exported is loaded into Ableton Live, an independent audio file for each part is placed in each track of Live, allowing you to edit each phrase using loop, mute, or chop, and then mix the result. After the music you envision has taken shape as a sequence with the rapidity that's possible only with hardware, you can then use your software to edit the material in detail. This is the new workflow with the electribe sampler.

Since the electribe sampler comes with a license card that lets you download "Ableton Live Lite" at no charge, you can experience this new workflow right away.

Specifications :

Sound System

• Type PCM sound engine + Analog modeling sound engine
• Maximum Polyphony 24 voices 

* The polyphony of the entire pattern varies depending on the Oscillator, Filter, and Insert Fx type.
* Independent parameters for each voice have been simplified; four voices share the parameters of one conventional voice. 

• Sample Type (920), Pitch/Glide, Edit
• S ample Types Analog (16), Audio In (2), Kick (37), Snare (44), Clap (12), HiHat (37), Cymbal (8), Hits (33), Shots (44), Voice (31), SE (7), FX (30), Tom (10), Percussion (31), Phrase (15), Loop (22), PCM (31), User Sample (499)
• Filter Filter (Cutoff), Resonance, EG Int, LPF/HPF/BPF (3)
• Modulation Type (72), Depth, Speed
• Amp/Envelope Generator Level, Pan, Attack, Decay/Release, Amp EG On/Off
• Scale Types 35
• Gate Arpeggiator Types 50
• Sampling Frequency 48 kHz
• AD/DA Conversion 24 bit  

Sampler

User Samples :  Up to 499 samples

Memory :  Total maximum approximately 270 seconds (calculated as monaural) 

* Regardless of the capacity of the SD card
* Including presets

Edits :  Start/End Point, Loop Start Point, Tune, Time Slice, Level, Direction, Resampling

Effect

Insert Effect 

• One unit (can be used on each of the 16 parts) 
• Type (38), Edit, Insert FX On/Off

Master Effect 

• One unit 
• Type (32), Touch Pad, Master FX On/Off, Master FX Hold On/Off

Sequencer

• Number o Steps 16 steps x 4
• Number of Parts 16 parts  (one part consists of a sound, steps, insert effect, modulation sequence, etc)
• Number of Patterns 250 patterns (150 Presets / 100 Initial)  (one pattern consists of parts, master effect, key, scale setting, etc)
• Motion Sequences Up to 24 motion sequences can be stored (for each pattern)
• Groove Types 25
• Pattern Set Up to 64 patterns can be stored
• Pattern Chain Up to 250 patterns can be chained
• Export Ableton Live project file format, WAV file format (48 kHz, 16 bit)
• Event Recording Up to 100 files can be saved

Trigger Pads

• Number of Pads 16 pads (Velocity sensitive)
• Modes Trigger, Sequencer, Keyboard, Chord, Step Jump, Pattern Set

Touch Pad

Modes Gate Arp, Touch Scale, Master FX

Connectors

• Audio :
  • L/Mono, R Output (Standard phone jack) 
  • Headphones (Stereo mini jack) 
  • Audio Input (Stereo mini jack)
• MIDI : In, Out (Use an included MIDI adapter cable)
• USB Type micro B
• Sync In, Out (Stereo mini jack)

External Storage Device : SD Card (512 MB -- 2 GB), SDHC Card (Up to 32 GB)

Power

• Power Supply AC adapter (DC 9V) or AA battery x 6 (Alkaline battery or Nickel metal hydride battery)
• Battery Life Approximately 5 hours (Power Saving: ON, with Nickel metal hydride battery)
• Current Consumption Less than 500 mA

Chassis : Zinc die cast

Dimensions : (W x D x H) 339 x 189 x 45 mm / 13.35” x 7.44” x 1.77”

Weight : 1.6 kg / 3.53 lbs

Color Variations : Metallic Red (electribe2s-RD), Black (electribe2s)

Included Items : AC adapter (DC9V), MIDI adapter cable x 2, Ableton Live 9 lite (License card included)

Accessories

• Sync Cables SQ-CABLE-6 
• Gig Bag DJ-GB-1

KORG - ELECTRIBE 2 SAMPLER RED

Referencia : ELECTRIBE 2 SAMPLER RED

399,00 €

Availability:   Available in stock Processing time:   Under 24/48 hours Guaranty: 3 years by manufacturer

Más

KORG - ELECTRIBE 2 SAMPLER RED - 16-part Drum Machine with 409 Analog Modeling/PCM Sounds

The fastest and most intuitive way to make beats. A production machine that lets you create using a gigantic array of samples.

The electribe sampler is a sample-based production machine that lets you construct beats at maximum speed. You can freely edit and resample using waveforms that you've loaded and preset samples. Modulation and effects can be controlled easily just by turning knobs on the top panel. In addition, a variety of input interfaces optimized for inputting rhythm, bass, or melody allow you to smoothly create sequences as fast as you can think.

The sequences that you create can then undergo additional evolution on stage or in your laptop. You can enjoy intuitive live performances that link various devices with the electribe sampler, or utilize this capability for full-fledged music production by exporting sequence data to Ableton Live for detailed editing and final mixing.

The latest system version 2 adds a much-requested pattern chain function that will be a great asset for live performances or music production. The lineup has also become more colorful with the new metallic red model. And we've also provided bonus patterns that reveal even greater sonic potential.

Making your beat-making ideas rapidly take shape. It's the electribe sampler; a sampler + sequencer that's thoroughly optimized for speed.

A new metallic red model – a nod to the legacy of electribe

Following the dark black unit, the lineup has been joined by a metallic red model that's reminiscent of the previous model, the ELECTRIBE SX. Complemented by the numerous colorfully illuminated LEDs, this unit will energize your playing.

Many new functions added via system update

Updates make the electribe sampler evolve daily. System version 2 adds support for the much-requested pattern chain function and undo function, as well as support for original value display. Users who already own an electribe sampler can update their unit and then enjoy playing.

Download over 200 bonus patterns

Electribe artists, sound designers, and beat makers from around the world have created bonus pattern data packed with new sounds, phrases, and sequences. These 237 different patterns are packed with sample sounds, drum kits, and ideas for a wide range of musical styles. They are provided as reference materials for your beat-making or as foundations to give you new inspiration.

Import any waveform, and even resample

The electribe sampler lets you load any sample from an SD card and use it for producing beats. There are 499 user sample memories in which you can store original waveforms that you've created using waveform editing software or sampled sources provided by developers. Of course you can also connect a record player or instrument to the audio in jack and sample from it.

You can edit the loaded waveforms in basic ways such as changing the start/end point or pitch, and even time-slice them. The attack portions of a phrase can be detected and sliced automatically, allowing you to play them back at a desired tempo without significantly changing the sound. Sliced parts can also be assigned to specific steps or parts and triggered individually.

There's also a resampling function that lets you sample a sound that you processed, a phrase that you constructed, or your realtime performance on the electribe sampler. Additional possibilities open up when you use this in conjunction with time slices; you can change the order or rhythmic groove of a phrase, or turn a multiple-part phrase into a single sample, allowing you to add phrases using the newly-free parts to create an even more complex pattern.

High-quality preset samples that let your ideas take shape quickly

The electribe sampler contains numerous production-ready sampled sources that you can use as soon as you power-on the unit. It provides a range of sampled audio sources suitable for any style of music, including 179 Drum/Perc samples such as Kick and Snare sounds that are indispensable for creating beats, 33 loop-type samples as you would expect from a sampler, 31 voice-type samples, 37 sound effect samples, and 123 more instrumental samples containing hits, shots, or phrases of Piano, Organ, Brass, or Guitar. Based on these samples from collaborators famed for their high quality, such as Sample Magic, Loopmasters, Prime Loops, and Raw Cutz, you can create the exact sample sounds that you want.

In addition, the electribe sampler provides 16 analog modeling oscillators and three filters, which you can use as accents for your sample-based music productions.

Modulation section for quick access to dramatic sound-shaping parameters

The modulation that's so important for sonic creativity is designed to be easy for anyone to control. Modulation sources such as EG and LFO are available paired with a modulation target such as Filter Cutoff and Oscillator Pitch; simply choose from 72 modulation types and then adjust the speed and depth to apply the type of modulation that you want.

A wide selection of insert effects add the final touch to parts and patterns

A total of 32 insert effects are provided, including compressor, overdrive, and EQ. Effects can be specified individually for all parts, letting you have uncompromising control over the nuances of your sound.

Velocity-sensitive trigger pads and X/Y touch pad work together; input notes or X/Y-generated phrases to bring your ideas to life.

The electribe sampler allows you to input up to 64 steps (16 steps x 4) for each part (sound). You can create beats by combining up to 16 of these parts per sequence pattern.

The step sequencer of the electribe sampler allows extremely intuitive pattern production. The 16 trigger pads and the touch pad with XY control provide a variety of modes that instantly reproduce the phrases created by your ideas, allowing rhythms and phrases to be input without requiring musical knowledge.

Trigger pads

• Trigger mode 

This mode is ideal for auditioning the sounds before you enter a sequence. The trigger pads are velocity sensitive, and by striking them rhythmically you can input drum and percussion patterns that have a sense of life and movement.

• Sequencer mode 

This mode is ideal for inputting rhythm. You can step-record by using the 16 trigger pads which correspond to 16 steps. This method makes it easy to see the timing of the notes, and can also be used for editing after realtime recording.

• Keyboard mode

This mode is ideal for playing melodies. The 16 trigger pads act as a keyboard, allowing you to play melodies according to the scale/key settings. You can also change the octave.

• Chord mode

This mode is ideal for playing chords. Simply by pressing a trigger pad, you can easily play chords according to the scale/key settings.

Touch pad

• Gate Arp mode

This mode is ideal for inputting bass riffs or hi-hat parts with a sense of groove. While playing the trigger pads or the touch pad, you can use the gate arpeggiator to generate rhythmically detailed notes.

• Touch Scale mode

This mode is ideal for those who are not comfortable with playing melodies on the keyboard, or as a way to generate some inspiration. Simply by moving your fingertip over the touch pad as on the Kaossilator, you can freely produce phrases according to the specified scale/key settings.

The electribe sampler seamlessly lets you edit sounds and input sequences in parallel. Input a sequence and edit the sound while listening to it. Efficient beat-making that would be difficult using just a DAW becomes stress-free on the electribe sampler, which allows you to think at the same speed as the music you're hearing.

Motion Sequence records parameter movements

The motion sequence function records and reproduces knob movements. You can add time-varying movement to looped sounds, creating a completely original flow of sound.

Last Step selector generates unconventional time signatures

The last step function lets you change the number of steps in the selected part. You can create unexpected and unconventional rhythms by specifying a different number of steps for each part. This function is also useful when you want to instantly change the character of the song, or when you want to adjust the length of the song.

Groove adds a natural rhythmic feel

You can choose from a total of 25 groove types that reproduce the playing technique and rhythmic feel of percussion instruments such as congas and bongos. By selecting a groove type for each part and adjusting its dynamics, you can create a natural-sounding rhythmic feel that's liberated from the 16-step grid.

Control your sequences in real time with absolute freedom

Sequences that you've created on the electribe sampler will shine even more on stage when you use the various functions provided for this purpose.

For example by using, the step jump function that lets you jump instantly to the step you press, you can create dynamic performances as though you were performing the sequence itself.

The electribe sampler also lets you freely use the trigger pads and touch pad to add sounds during your live performance. Thanks to the scale/key settings, you'll never play a wrong note.

The sequences that you create can be played not only on stage, but are also fun to tweak in real time. The dynamic character of such changes makes this one of the electribe sampler's great pleasures.

Use Pattern Set and Pattern Chain to build and organize full arrangements 

The pattern set function lets you register your favorite sequence patterns to the trigger pads and instantly switch between them. While you play, you can switch successively between patterns to vary the beat.

In system version 2, a pattern change function has been newly added. Using this, multiple sequence patterns can be connected for successive playback, allowing you to construct large-scale development in your song.

X/Y pad offers real-time effects performance

You can use the touch pad to freely control the master effect just as on the Kaoss Pad. You can use spatial-type effects to add overall resonance, or use "Looper" to easily create the texture of your sequence, or even use effects such as "Seq Reverse" or "Odd Stepper" to aggressively transform the music. This is also enormously effective in a live performance. 

Sync, MIDI, and Audio In jacks for integration into any setup

Since there's a sync jack for easy connection to KORG's groove machines, you can connect the electribe sampler to your electribe, volca series unit, or SQ-1 for playback sessions that are synchronized with your sequencer. 

MIDI connectors are also provided for inter-operation with your DAW. By adding the electribe sampler's performance to your laptop-based stage setup, you can take advantage of even greater performance possibilities. 

In addition to sampling via the audio in jack, you can use it during your performances, for example by applying filter and effects to an external audio input source in real time, or using the step sequencer to turn the output on/off. 

In the past, machine-centric live setups required numerous synthesizers, samplers, and sequencers. Today, the electribe sampler can function in a variety of roles, either as the master device at the center of such a setup, or as a slave device that adds sparkle to the performance. Experiment with connecting different instruments to create your very own live setup.

Inter-operation with Ableton Live for a new production workflow

Using your software, you can take the numerous beats that you've come up with and assemble them into a finished product. KORG has partnered with the German company Ableton to provide a new music production workflow that uses both hardware and software.

In addition to the conventional audio export, the electribe sampler has a function for exporting to "Ableton Live" DAW software. When the dedicated project file that's exported is loaded into Ableton Live, an independent audio file for each part is placed in each track of Live, allowing you to edit each phrase using loop, mute, or chop, and then mix the result. After the music you envision has taken shape as a sequence with the rapidity that's possible only with hardware, you can then use your software to edit the material in detail. This is the new workflow with the electribe sampler.

Since the electribe sampler comes with a license card that lets you download "Ableton Live Lite" at no charge, you can experience this new workflow right away.

Specifications :

Sound System

• Type PCM sound engine + Analog modeling sound engine
• Maximum Polyphony 24 voices 

* The polyphony of the entire pattern varies depending on the Oscillator, Filter, and Insert Fx type.
* Independent parameters for each voice have been simplified; four voices share the parameters of one conventional voice. 

• Sample Type (920), Pitch/Glide, Edit
• S ample Types Analog (16), Audio In (2), Kick (37), Snare (44), Clap (12), HiHat (37), Cymbal (8), Hits (33), Shots (44), Voice (31), SE (7), FX (30), Tom (10), Percussion (31), Phrase (15), Loop (22), PCM (31), User Sample (499)
• Filter Filter (Cutoff), Resonance, EG Int, LPF/HPF/BPF (3)
• Modulation Type (72), Depth, Speed
• Amp/Envelope Generator Level, Pan, Attack, Decay/Release, Amp EG On/Off
• Scale Types 35
• Gate Arpeggiator Types 50
• Sampling Frequency 48 kHz
• AD/DA Conversion 24 bit  

Sampler

User Samples :  Up to 499 samples

Memory :  Total maximum approximately 270 seconds (calculated as monaural) 

* Regardless of the capacity of the SD card
* Including presets

Edits :  Start/End Point, Loop Start Point, Tune, Time Slice, Level, Direction, Resampling

Effect

Insert Effect 

• One unit (can be used on each of the 16 parts) 
• Type (38), Edit, Insert FX On/Off

Master Effect 

• One unit 
• Type (32), Touch Pad, Master FX On/Off, Master FX Hold On/Off

Sequencer

• Number o Steps 16 steps x 4
• Number of Parts 16 parts  (one part consists of a sound, steps, insert effect, modulation sequence, etc)
• Number of Patterns 250 patterns (150 Presets / 100 Initial)  (one pattern consists of parts, master effect, key, scale setting, etc)
• Motion Sequences Up to 24 motion sequences can be stored (for each pattern)
• Groove Types 25
• Pattern Set Up to 64 patterns can be stored
• Pattern Chain Up to 250 patterns can be chained
• Export Ableton Live project file format, WAV file format (48 kHz, 16 bit)
• Event Recording Up to 100 files can be saved

Trigger Pads

• Number of Pads 16 pads (Velocity sensitive)
• Modes Trigger, Sequencer, Keyboard, Chord, Step Jump, Pattern Set

Touch Pad

Modes Gate Arp, Touch Scale, Master FX

Connectors

• Audio :
  • L/Mono, R Output (Standard phone jack) 
  • Headphones (Stereo mini jack) 
  • Audio Input (Stereo mini jack)
• MIDI : In, Out (Use an included MIDI adapter cable)
• USB Type micro B
• Sync In, Out (Stereo mini jack)

External Storage Device : SD Card (512 MB -- 2 GB), SDHC Card (Up to 32 GB)

Power

• Power Supply AC adapter (DC 9V) or AA battery x 6 (Alkaline battery or Nickel metal hydride battery)
• Battery Life Approximately 5 hours (Power Saving: ON, with Nickel metal hydride battery)
• Current Consumption Less than 500 mA

Chassis : Zinc die cast

Dimensions : (W x D x H) 339 x 189 x 45 mm / 13.35” x 7.44” x 1.77”

Weight : 1.6 kg / 3.53 lbs

Color Variations : Metallic Red (electribe2s-RD), Black (electribe2s)

Included Items : AC adapter (DC9V), MIDI adapter cable x 2, Ableton Live 9 lite (License card included)

Accessories

• Sync Cables SQ-CABLE-6 
• Gig Bag DJ-GB-1

KORG - ELECTRIBE 2 SAMPLER RED

Artikel-Nr : ELECTRIBE 2 SAMPLER RED

399,00 €

• Condition: Neuf
• Stock-B: Stock-B
• Brand: Korg
• MPN: ELECTRIBE 2 SAMPLER RED - STOCK-

Voir Plus