Mercedes OM642 kit collecteur d'admission coureur tige de raccordement capteur diesel 3,0 L V6 E320/E350/GL320/GL350/ML320/ML350/R320/R350/Sprinter

EUR 23,28 Achat immédiat ou Offre directe, Cliquez pour voir les frais d'expédition, 60-Jour Retours, Garantie client eBay
Vendeur: bxparts ✉️ (2.825) 100%, Lieu où se trouve: San Antonio, Texas, US, Lieu de livraison: US et de nombreux autres pays, Numéro de l'objet: 183630558161 Mercedes OM642 kit collecteur d'admission coureur tige de raccordement capteur diesel 3,0 L V6.

Mercedes OM642 Intake Manifold Swirl Runner Connecting Rod Sensor 3.0L V6 Repair

Mercedes OM642 Intake Manifold Runner Connecting Rod Diesel 3.0L V6 Repair Kit - YouTube

Video will open in a new window Using the eBay App? Paste link into a browser window:

[isdntekvideo]

Visit our store to view all different kinds of Connecting Rods 

(With & Without Sensor Pickups)

https://www.ebay.com/str/MercedesBenzparts007

PROBLEM:

==========

A common failure inherent to the intake manifold of Mercedes-Benz OM642 V6 CDI / CRD engines is for breakage of the actuating mechanisms on the intake swirl flap system. The plastic material used in the construction of the intake manifold is the main source of the problem.  These swirl flaps help create better torque low down and enhance fuel economy. However the material of this lever that controls the swirl flaps has been incorrectly specified.  Over time this less robust plastic material cannot withstand the constant heat cycles and mechanical stresses, therefore embittering and weakening the material leading to inevitable failure. Our Premium intake manifold repair kit is the only solution which solves all of these issues during your first and only repair...

One of the faults of the OM642 diesel engine is the defective intake manifold flaps, they stop working due to the wear of the chuck fixing clips, the thrust guide of the connection to the flaps, and the seat plates on the dampers levers.

The cause of wear is the material from which the vortex dampers drive system itself is made - plastic.

Over time, the connection points of the linkage and the flaps wear out, this leads to a malfunctioning system of the vortex dampers of the manifold of the Mercedes.

Engine control module stored pending codes for Intake Manifold Air Flap or Runner Control System problems, in order to fix this problem need a complete replacement of the "Intake Manifold Assembly"... ... but by using our new repair kit, specially designed to save you money, you will not have to replace complete Intake Manifold Assembly.

Repair Kit Includes:

================

- 2 X Aluminum Rods (for Right & Left Intake manifolds)

- 6 X Anti-friction adapters (contribute to easy slip. protect from wear and tear).

- 6 X STRONG New Retainer Clips (fiber glass + plastic)

Note:

====

It is recommended to upgrade Swirl Valve arms (not included in this repair kit) as they worn out like connecting rods and this is the BEST TIME to upgrade as you do not want to repair intake manifolds again in future. Click on below link:

https://www.ebay.com/itm/OM642-Intake-Manifold-Swirl-Valve-Arm-Connecting-Rod-Diesel-3-0L-V6-Repair-Kit/183794877697?hash=item2acb074501:g:bAAAAOSwU5dc0h4R:sc:USPSFirstClass!78216!US!-1

FITMENT:

=========

Mercedes

  • E 320 BlueTEC (W211) w/ 3.0L OM642 Engine (2007-2009)
  • E 350 BlueTEC (W212) w/ 3.0L OM642 Engine (2011-2013)
  • GL 320 CDI (X164) w/ 3.0L OM642.820 Engine (2007-2008)
  • GL 320/350 BlueTEC (X164) w/ 3.0L OM642.820 Engine (2009-2012)
  • ML 320 CDI (W164) w/ 3.0L OM642.940 Engine (2007-2008)
  • ML 320/350 BlueTEC (W164) w/ 3.0L OM642.820 Engine (2009-2011)
  • R 320 CDI (W251) w/ 3.0L OM642.950 Engine (2007-2008)
  • R 320/350 BlueTEC (W251) w/ 3.0L OM642.870 Engine (2009-2012)

Sprinter

  • Sprinter Gen2 NCV3 w/ OM642 3.0L V6 (2010-2018)

This part can also be specifically used in 2005-2008  models of vehicles below.

  • Jeep Grand Cherokee WK / WH
  • Jeep Commander XK / XH
  • Mercedes-Benz C320 / C350 CDI
  • Mercedes-Benz E280 / E320 CDI/BlueTEC
  • Mercedes-Benz R320 / R350 CDI/BlueTEC
  • Mercedes-Benz ML320 / ML350 CDI/BlueTEC
  • Mercedes-Benz GL320 / GL350 CDI/BlueTEC
  • Mercedes-Benz S320 / S350 CDI/BlueTEC
  • Mercedes-Benz CLS320 / CLS350 CDI/BlueTEC
  • Chrysler 300C
NOTE: Please make sure to compare your original part with the pictures provided before ordering.

FAILURE IN SYSTEM CAUSES:

=========================

1- Poor idle

2- Loss of power

3- Check engine light 

4- Fail emission system

5- You will also notice various running issues from poor idle, loss or power and delayed acceleration. 

You can easily diagnose the fault yourself by removing the engine covers and inspecting the intake manifold from the front to see the condition of it. Most likely if you are suffering from these issues then the lever has snapped in half.

We do not recommend the use of rods entirely made of aluminum (which can offer other sellers), because there will be rapid wear of the plastic intake manifold levers, causing the manifold to be damaged. Our solution protects you from this problem.

SOLUTION:

=========

The repair kit for the swirls of the vortex dampers of the Mercedes intake manifold with the OM642 diesel engine, the kit is provided immediately for 2 collectors - left and right.

Solve this problem could only be replacing the intake manifold in the face, with the collector cost $ 600-700 per piece, and given the fact that you need to replace both collectors (right and left), this is a very inexpensive solution.

We propose a way out of this situation - a repair kit for the traction of the vortex dampers of the Mercedes (the thrust of the vortex dampers of the Mercedes is made of aluminum, and this significantly extends their service life). Thanks to repair kit you completely solve this problem, the functioning of the vortex dampers system is restored, besides it is a great saving of your budget and time!

ONLY ALUMINUM MADE LINKAGE AND NEW CLIPS WILL MAKE YOU SURE THAT THE PROBLEM IS SOLVED !!!

Replacement instructions: 

======================

Replacement parts repair kit is not a complicated procedure, but it should be done in stages and thoroughly accurately, because all the elements included in the kit are created with high accuracy. 

1. Thorough cleaning of the seats of spacer adapters (rinse with gasoline, using a needle to completely clean all deposits).

2. Lubrication of seats with a thin layer of a thick lubricant (you need very little lubrication).

3. We put the spacers / adapters (the lubricant keeps the spacers on the levers without letting them fall).

4. Further the installation of traction, it is also recommended not to forget about the thin layer of lubricant.

5. Install new clips !!! Repair is Over!!!!

If you have any Question: (Click here to Contact Us )

====================

1. You are not  satisfy  with the item quality.

2. Item do not fit Properly.

    3. Item not delivered on expected time.

      4. Item arrived damaged.

        5.You have not receive the item.

          6.Parcel Lost.

            7.Receive the wrong item.

              Please do not worry !!!

                We are honest eBay dealers ,we will endeavor to resolve all of your problems until you are satisfied.

                  Please feel free to  Click here to Contact Us

                  Note:

                  International buyers might need to pay custom charges.

                  • Condition: Neuf
                  • Features: Polished
                  • Manufacturer Warranty: Lifetime
                  • Custom Bundle: No
                  • Engine Size: V6
                  • OE/OEM Part Number: 642 090 06 37 / 642 090 69 37
                  • Fitment Type: Direct Replacement
                  • Modified Item: No
                  • Superseded Part Number: 642 090 48 37, 6420904837, A642 090 48 37, A6420904837, A 642 090 48 37, A 6420904837
                  • Fuel Type: Diesel
                  • Country/Region of Manufacture: United States
                  • Material: Aluminum
                  • Non-Domestic Product: No
                  • Interchange Part Number: 642 090 06 37, 6420900637, A 642 090 06 37, A 6420900637, A6420900637, A642 090 06 37
                  • Placement on Vehicle: Front
                  • Manufacturer Part Number: 642 090 06 37 / 642 090 69 37
                  • Brand: UR0
                  • Mounting Hardware Included: Yes
                  • Type: Intake Manifold

                  PicClick Insights - Mercedes OM642 kit collecteur d'admission coureur tige de raccordement capteur diesel 3,0 L V6 PicClick Exclusif

                  •  Popularité - 70 personnes suivent la vente, 0.0 de nouvelles personnes suivent la vente par jour, 1.904 days for sale on eBay. Super grande quantité suivi. 560 vendu, 10 disponibles.
                  •  Meilleur Prix -
                  •  Vendeur - 2.825+ articles vendu. 0% évaluations négative. Grand vendeur avec la très bonne rétroaction positive et plus de 50 cotes.

                  Les Gens ont Aussi Aimé PicClick Exclusif