Mocal 16 Rangées 115 Mm An -10 Jic Refroidisseur D'huile Moteur Universel Oc1167-10 Adg
GENUINE MOCAL 16 ROW 115MM OIL COOLER WITH -10 FITTINGS
Universal Fitment
Also available with AN -6/-8 JIC, 1/2 / 5/8BSP, & M22x1.5 fittings
OIL COOLERS & FITTING KITS AVAILABLE FOR MOST MAKES & MODELS - PLEASE SEE OUR SHOP ITEMS
This is a brand new Mocal 16 row oil cooler. Mocal's range of coolers have a working pressure of 10bar / 150psi although each cooler is tested to 11.5bar / 170psi. The cooler is designed for use with Mocal oil cooler/remote filter systems, it may NOT be compatible with any factory fitted oil cooler systems
SPEC:
Rows: 16
Fittings: -10jic (convex seat)
Working Pressure: 10bar / 150psi
Weight: 0.60kg
Capacity: 0.19Litres
Dimensions: 124mm high / 210mm overall width / 51mm depth
Matrix Width: 115mm
OIL COOLER ONLY - NO FITTING KIT
Exact cooler size required depends upon: The type of use, ambient temperature, spec of the engine (internal friction, rev range, power etc), airflow through the cooler and over the sump
If you are using your car for any form of track, competition or high performance use then the engine oil will need cooling
The most common cause of competition / high performance engine failure is loss of oil pressure, as the oil heats up it becomes thinner. This lowers the pressure produced by the pump and increases the oil escape from the bearings lowering the overall pressure further still
Roughly speaking you need about 10psi of oil pressure per 1000rpm
e.g. 7000rpm requires 70psi oil pressure
If the pump cannot meet this demand when the oil is hot/thin engine failure will result - usually in the form of running a crank bearing (death rattle) or throwing a rod through the side of the block!
This is especially important on part worn engines - a cooler/thicker oil will give the oil pump a fighting good chance of meeting the demand. On a new or part worn engine if the oil pressure is maintained, the engine isn't over revved or over heated there is no reason for failure
For track, competition or high performance use a rough target temperature for the oil is around 100°C. Over 100°C the oil thins out rapidly and therefore drops the pressure
Turbo systems will rocket the oil temperature
Designed for Motorsport use. No instructions are included. (Some fitting tips & tightening torques are included)
Picture shows what you will receive if you purchase this item
IMPORTANT INFORMATION:
Postage : We will endeavour to despatch most items purchased before 3pm the same day (may not be possible on all items following bank holidays/busy periods etc). If any items cannot be despatched within the stated time frame we will contact you - despatch times are shown on each listing (we cannot be held responsible for delivery companies/couriers that do not deliver on time due to address queries/bad weather/locational errors etc). For shipping prices please click on the "Postage and Payments " tab (postage prices also include packaging/materials & other costs). Most of our listings have a number of postage options - please select the service you require BEFORE purchase. If you have selected a postage service with a tracking number, one will be uploaded to eBay at the end of the working day
Questions: We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 09:30-17:30), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated (if products fit other models its in our favour to say so)! Products listed as universal fitment are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated - please have an understanding of what you are buying before purchase. Please allow 24h for us to respond to your question, if more than 24 hours has elapsed please contact us again
Feedback: Please be reasonable - we do not like to give or receive anything but positive feedback. If you have a problem with your order please contact us and give us the opportunity to rectify the situation - mistakes do happen, not often but they do happen
Above all we want you to have a positive buying experience and purchase from us again
- Condition: Neuf
- Mounting Style: Bolt-On, Bracket Mount
- Outlet Diameter: -10jic
- Items Included: Oil Cooler
- Manufacturer Part Number: OC1167-10
- Pressure Rating: 11 bar
- Material: Aluminium
- Item Length: 210mm
- Brand: Mocal
- Type: Oil Cooler
- Manufacturer Warranty: 1 Year
- Item Height: 124mm
- Inlet Diameter: -10jic
- Classic Part: No
- Features: 100% Leak tested, Durability Tested, No Drilling or Modifications Needed for Installation, Single-pass Cooling
- Country/Region of Manufacture: United Kingdom
- Universal Fitment: Yes
- End Fitting Type: Male Threaded
- Finish: Matte, Painted
- Item Width: 51mm
- Performance Part: Yes
PicClick Insights - Mocal 16 Rangées 115 Mm An -10 Jic Refroidisseur D'huile Moteur Universel Oc1167-10 Adg PicClick Exclusif
- Popularité - 6 personnes suivent la vente, 0.0 de nouvelles personnes suivent la vente par jour, 2.337 days for sale on eBay. Super grande quantité suivi. 12 vendu, 0 disponible.
- Meilleur Prix -
- Vendeur - 109.137+ articles vendu. 0.3% évaluations négative. Grand vendeur avec la très bonne rétroaction positive et plus de 50 cotes.
Les Gens ont Aussi Aimé PicClick Exclusif
Mocal 16 Row 115Mm An -8 Jic Universal Engine Oil Cooler Oc1167-8 Adf
EUR 104,46 Achat immédiat 6d 21h
Mocal 16 Row 115Mm An -6 Jic Universal Engine Oil Cooler Oc1167-6
EUR 104,46 Achat immédiat 13d 19h
Mocal 16 Row 115Mm An -12 Jic Universal Engine Oil Cooler Oc1167-12 Adh
EUR 104,46 Achat immédiat 6d 21h
Mocal 10 Row 115Mm An -6 Jic Universal Engine Oil Cooler Oc1107-6 Acv
EUR 76,14 Achat immédiat 9d 1h
Mocal 16 Row 235Mm An -10 Jic Universal Motorsport Oil Cooler Oc5167-10 Aaf
EUR 123,01 Achat immédiat 21d 20h