T2MS1P - Type 2 Duosida 62196-2 Prise de charge EV - MÂLE - 63A max - 0,4 kg

EUR 105,05 Achat immédiat, EUR 12,60 Livraison, 14-Jour Retours, Garantie client eBay
Vendeur: evbitzuk ✉️ (2.213) 99.4%, Lieu où se trouve: Isle of Colonsay, GB, Lieu de livraison: WORLDWIDE, Numéro de l'objet: 323782726078 T2MS1P - Type 2 Duosida 62196-2 Prise de charge EV - MÂLE - 63A max - 0,4 kg. The Duosida brand is widely used in the EV industry and I carry spare parts for it and other Duosida products. Also known as a 'Mennekes' EV plug, this high-quality plug made by Duosida and conforms to the IEC 62196-2 standard, is designed for use in EVs as the car-side charging socket (ie built-in to the EV) and will accept a compatible, Type 2, FEMALE plug.  It has a plastic, tethered, twist-on dust cap.  It does not contain any illumination LEDs but has provision for fitting them behind the red and green lenses.  It comes with 4 x stainless steel M5 x 15mm countersunk hex-drive bolts, washers and nyloc nuts. The socket can also be ordered from my companion webshop with (or without) 1 or 3 phase, 16A (2.5mm2 CSA) or 32A (6.0mm2 CSA) copper wire tails pre-attached using a professional high-power crimper.  Standard cable lengths are 1, 3, & 5m.  These come in a flexible orange conduit, 20mm in diameter (O/S dimension).  Longer lengths may also be ordered by special arrangement.  The socket can also be ordered with an 'auto switch-on' circuit pre-installed.  This means that as soon as an EVSE is connected to the socket, the mains appears at the power pins.  Please see the relevant section of my webshop for more details and ordering. Note: This auction is for the socket, cap and mounting nuts/bolts/washers only. The easiest way to install the socket (IMO) is to cut a circular hole 83 to 85mm in diameter in the panel and install the socket from behind the panel.  The cap teather attaching loop will have to be cut off and the tethered secured under on fo the socket flange attachment screw heads (much mores secure than the original anyway). Ensure the panel is not too thick such that it interferes with the attachment of the dust cap! The socket is single phase (1P) 32A (ie 7kW) compatible and it comes with 1P connection pins included and blanking plugs for the unused L2 & L3 pin holes.  If you need 3P (32A 22kW) please contact me. All power connection pins have a conductor entry hole of 4mm diameter, large enough for fine stranded 10mm2 (60A-70A) conductors, maximum (but this is a very tight fit!). NOTE:  The connectors in these plugs require crimping with a suitable (high-power) crimper eg a hydraulic one. The socket is IP54 rated. Approximate Dimensions (mm):- 160L, 110H & W.  Weight: 400g. The socket can be disassembled with a T15 Torx driver (bit/blade needs to be at least 35mm long due to the depth of the head of some screws within the socket body). The long bit is available on the webshop at EVBitz.uk. Free Royal Mail postage is included which usually takes 2-4 days within mainland UK (excluding weekends) - but may take as much as 7 days.
  • Condition: Neuf
  • Brand: Duosida (Dostar)

PicClick Insights - T2MS1P - Type 2 Duosida 62196-2 Prise de charge EV - MÂLE - 63A max - 0,4 kg PicClick Exclusif

  •  Popularité - 44 personnes suivent la vente, 0.0 de nouvelles personnes suivent la vente par jour, 1.806 days for sale on eBay. Super grande quantité suivi. 124 vendu, 9 disponibles.
  •  Meilleur Prix -
  •  Vendeur - 2.213+ articles vendu. 0.6% évaluations négative. Grand vendeur avec la très bonne rétroaction positive et plus de 50 cotes.

Les Gens ont Aussi Aimé PicClick Exclusif